28-31 Model A Ford Power Brake Pedal Assembly

Application: 28-31 Model A Ford Stock Frame or as a Universal Frame Mount Pedal

28-31 Model A Ford Power Brake Pedal Assembly: This custom "beneath the floor" pedal bracket features an appropriate length "power assist" arm and bolt on bracket that mounts to a stock Ford Model A frame. The pedal arm will come up through your floor in the OE location. If your frame is boxed you will need to weld the bracket onto the frame after trimming off the ends as it is designed to slip inside the open "C" channel and bolt to the inside of the frame rail. The pedal assembly then bolts to the frame mounted bracket.

The kit includes a DUAL diaphragm 7" zinc plated universal booster and new iron corvette style master cylinder. Non corosive aluminum options below. Black powder coated pedal and boosters also available under the Pro Line catigory.

Add the proper proportioning valve and residual valves (highly recommended) if you need them. Residual valves are required to stop fluid drainback from caliper or wheel cylinder into MC when the MC is lower than your calipers. These plumb inline and vastly improve how fast your brakes respond with under floor units.

Power booster, prop valve and master cylinder options available below.

This pedal works very well for most pre-war cars and trucks, early jeeps, early military vehicles etc. when you want a beneath the floor brake system.

Imported. Package weighs a hefty 34 lbs.